Tesla water pump




Tesla water pump

Article Navigation:
  • Photo
  • Tesla Model S Electric Coolant Water Pump F NTO "11" Miles IIHS | eBay
  • Video
  • RELATED PAGES
  • Tesla Model S water pump. Order car parts on year of construction, wagon number. Simply place a request. Ordered today, delivered tomorrow.

    Tesla: the Worldwide Leader Manufacturer of submersible pumps. On our web site available technical details about our submersible deep well pumps, motors.

    Have you ever noticed the sound of a water pump running in the back of a parked Tesla? It runs pretty much all the time, and makes the coolant.

    Tesla water pump

    Tesla water pump

    This limited it to harvesting waste steam from the main power plants, a pair of reciprocating steam engines. In such a case, owing to the very great expansion ratio, the exhaust mixture will be at a relatively low temperature and suitable for admission to the condenser. With common fluids, the required disk spacing is dismally small causing [rotors using] laminar flow to tend to be large and heavy for a prescribed throughflow rate. All the plates and washers are fitted on and keyed to a sleeve threaded at the ends and equipped with nuts and collars for drawing the thick end-plates together, or the collars may be simply forced onto it and the ends upset.

    Tesla water pump

    Tesla water pump

    Tesla water pump

    Tesla water pump

    Tesla water pump

    Tesla: Italian manufacturer of submersible pumps, submersible motors, pumps controllers.

    The Tesla turbine is a bladeless centripetal flow turbine patented by Nikola Tesla in The Tesla turbine is also known as the boundary-layer turbine , cohesion-type turbine , and Prandtl-layer turbine after Ludwig Prandtl because it uses the boundary-layer effect and not a fluid impinging upon the blades as in a conventional turbine.

    Bioengineering researchers have referred to it as a multiple-disk centrifugal pump. The guiding idea for developing Tesla turbine is the fact that in order to attain the highest efficiency, the changes in the velocity and direction of movement of fluid should be as gradual as possible.

    Tesla water pump

    A Tesla turbine consists of a set of smooth disks, with nozzles applying a moving fluid to the edge of the disk. The fluid drags on the disk by means of viscosity and the adhesion of the surface layer of the fluid. As the fluid slows and adds energy to the disks, it spirals into the center exhaust.

    Since the rotor has no projections, it is very sturdy. Minor departures from the turbine, as may be dictated by the circumstances in each case, will obviously suggest themselves but if it is carried out on these general lines it will be found highly profitable to the owners of the steam plant while permitting the use of their old installation.

    Tesla water pump

    However, the best economic results in the development of power from steam by the Tesla turbine will be obtained in plants especially adapted for the purpose.

    This turbine can also be applied to condensing plants operating with high vacuum. In such a case, owing to the very great expansion ratio, the exhaust mixture will be at a relatively low temperature and suitable for admission to the condenser. All the plates and washers are fitted on and keyed to a sleeve threaded at the ends and equipped with nuts and collars for drawing the thick end-plates together, or the collars may be simply forced onto it and the ends upset. The sleeve has a hole fitting snugly on the shaft, to which it is fastened as usual.

    This construction permits free expansion and contraction of each plate individually under the varying influence of heat and centrifugal force and possesses a number of other advantages, which are of considerable practical importance.

    Tesla water pump

    A larger active plate area and consequently more power is obtained for a given width, improving efficiency. Warping is virtually eliminated, and smaller side clearances may be used, which results in diminished leakage and friction losses. The rotor is better adapted for dynamic balancing and through rubbing friction resists disturbing influences thereby ensuring quieter running. For this reason and also because the discs are not rigidly joined, it is protected against damage which might otherwise be caused by vibration or excessive speed.

    The Tesla turbine has the trait of being in an installation normally working with a mixture of steam and products of combustion and in which the exhaust heat is used to provide steam supplied to the turbine, providing a valve governing the supply of the steam so that the pressures and temperatures can be adjusted to the optimal working conditions. An efficient Tesla turbine requires close spacing of the disks. For example, a steam-powered type must maintain 0.



    • Подписаться по RSSRSS
    • Поделиться VkontakteVkontakte
    • Поделиться на FacebookFacebook
    • Твитнуть!Twitter

    Leave a Reply

    Return to Top ▲TOP ▲